Equipment

Belt grinding machine complete with a powerful extractor (dust collector)
metal dust. The Scantool 150X grinder is designed for grinding/polishing metal
workpieces by hand. It is a simple and reliable machine that is easy to use and practical in operation, with a perfectly
sophisticated quick-change abrasive belt system.

The belt grinding machine is equipped with a module for sampling the radius of all types of pipes (round, square, monolithic) with diameters from 17 to 100 mm complete with a powerful hood. The Scantool 150RBX grinder is designed for contact grinding/polishing and radius sampling of metal workpieces by hand. It is a simple and reliable machine that is easy to use and practical machine with a sophisticated quick-change system that allows for a quick and easy of the abrasive belt and type of grinding.

The belt grinding machine is equipped with a module for sampling the radius of all types of pipes (round, square, monolithic) with diameters from 17 to 100 mm. The Scantool 150RB grinder is designed for contact grinding/polishing and radius sampling of metal workpieces manually. It is a simple and reliable machine that is easy to use and practical to operate, with a well-designed system for quick change of the abrasive belt and type of grinding.

The belt grinding machine is designed for grinding/polishing metal workpieces by hand. The Scantool 150 is a simple and reliable machine that is easy to use and practical to operate, with a sophisticated system for quick sanding belt changes.

Belt grinding machine complete with a powerful extractor (dust collector) metal dust. The Scantool 75X grinder is designed for grinding/polishing metal
workpieces by hand. It is a simple and reliable machine that is easy to use and practical to operate, with a perfectly sophisticated quick-change abrasive belt system.

The belt grinding machine is equipped with a module for sampling the radius of all types of pipes (round, square, monolithic) with diameters from 17 to 70 mm complete with a powerful hood. The Scantool 75RBX grinder is designed for contact grinding/polishing and radius sampling of metal workpieces by hand. It is a simple and reliable machine that is easy to use and practical machine with a sophisticated quick-change system that allows for a quick and easy of the abrasive belt and the type of grinding.

The belt grinding machine is equipped with a module for sampling the radius of all types of pipes (round, square, monolithic) with diameters from 17 to 70 mm. The Scantool 75RB grinder is designed for contact grinding/polishing and radius sampling of metal workpieces manually. It is a simple and reliable machine that is easy to use and practical to operate, with a well-designed system for quick change of the abrasive belt and type of grinding.

The mobile belt sander is designed for grinding/polishing sheet material and removing weld seams on a flat surface. The Scantool 75FG is a simple
and reliable machine that is practical to use and has been perfectly designed for for a quick abrasive belt change.

The belt sander is equipped with a centreless attachment and a Teflon backing plate complete with a powerful extractor (dust collector) metal dust. The Scantool 75CGX grinder is designed for contact and centreless grinding/polishing of metal workpieces by hand. It is a simple and reliable machine that is practical in This machine is simple and reliable, easy to use and has a sophisticated quick change system of the abrasive belt.

The belt grinding machine is equipped with a centreless attachment and a Teflon backing plate. The Scantool 75CG grinder is designed for contact and
centreless grinding/polishing of metal workpieces by hand. It is a simple and reliable, and practical in operation, with a sophisticated quick-change system
abrasive belt change system.

The belt sander is designed for grinding/polishing metal workpieces by hand. The Scantool 75 grinder is a simple and reliable, practical machine with a perfectly designed system for quick replacement of the sanding belt.

Handheld surface grinding machine CUB GECAM for various processes of processing metal surfaces depending on the type of installed brush. Adjustable conveyor belt feed speed to ensure the desired end result. Adjustable brush speed is also available upon request. Ease of use of the machine, which allows you to significantly reduce costs compared to traditional automatic grinding machines. A brush group of unique design with a manual flywheel for positioning the heads on the work surface. The heads are open from the operator's side, which allows processing parts wider than the conveyor belt. Suitable for use with any type of cylindrical brush.

Hand grinding machine EASY T-2020 GECAM for deburring with two tools, suitable for various processes of metal processing, grinding, deburring, rounding and polishing. Equipped with a head mounted on a rocker arm that can be tilted 180° for quick change of two rotating tools. Adjustable speed and vacuum system to hold parts on the work table. Depending on the desired material and finish, different types of brushes can be installed. Internal hood.

Grinding machine G 110 GECAM with maximally independent internal working groups, with motorized lifting mobile table. Advance belt with automatic centering system and excess thickness control system. Unit for diagnosing emergency signals with immediate display of emergency situations and malfunctions. Adjustable feed rate. Exhaust hoods for each working group. The possibility of adding 4 external cylindrical brushes.

Grinding Deburring machine G 135 GECAM  on a mobile stand with maximum upper working groups with a variable configuration according to the specific needs of finishing, with independent motors for autonomous control of the working group. Working table with an electric drive with adjustable rotation speed and the possibility of installing a vacuum system for better sealing of parts. Self-centering belt, excess thickness control system. Hoods for each group.

Grinding Deburring machine GB 8 GECAM on a mobile stand with maximum upper working groups with a variable configuration according to the specific needs of finishing, with independent motors for autonomous control of the working group. Working table with an electric drive with adjustable rotation speed and the possibility of installing a vacuum system for better sealing of parts. Self-centering belt, excess thickness control system. Hoods for each group.

The Grinding Deburring machine GCB RR GECAM  is equipped with a double grinding belt and a front table (the extended part is offered upon order). Grinding equipment Gecam GCB 25 RR also has a tab for processing products. The machine for removing burrs has a high working capacity with speed control and tensioning pneumatic system. In his tables, an electric drive is provided for connection and transmission, as well as a set of direct lighting at the outlet.

Grinding Deburring machine G 20 GECAM   dry machines working from above and below in one pass, machines for removing burrs and grinding sheet metal for processing flat steels, profiled parts, mild steel, stainless steel, aluminum, relief details.

Grinding machine with a water sprayer for metal surfaces prone to thermal deformation. Equipped with a full and rigid feeding bench with a Super-Grip mat for a perfect fit of pieces during handling. Move the bench using a handwheel with a thickness display with precise adjustment. Feed speed of two sheets up to 10 m/min. Group for drying products at the exit. Configuration with two workgroups. Equipped with a steel tank for collecting water, a fabric paper filter for sludge separation.

Grinding Deburring machine GE 30 GECAM for metal surfaces with a useful working width of up to 300 mm with one and a movable feeding table with raising and lowering thanks to the flywheel, with a doubled feeding speed up to 10 m/min. Can be adjusted to 3 working groups, independently controlled from the control panel.

Grinding machine GE 65 GECAM with two working groups determined by a mobile table with electronic adjustment from a touch screen. Equipped with a block with an abrasive belt, suitable for removing large burrs in plasma and oxygen processing, with a system that allows you to remove them by processing only the edges of the part. Feed unit with adjustable speed and a conveyor belt made of natural rubber, resistant to high temperatures and oils.

Grinding machine GM GECAM with one working group with an abrasive belt, with a mobile table, with an adjustment lever with precise control +/- 0.1 and a digital thickness indicator. The front group with a three-fisted rubber band with rubberized pressure rollers before and after the working group and an idle roller at the entrance and exit.

Grinding machine GT 06 GECAM for metal surfaces and rounding of edges, with 6 upper and lower working groups for simultaneous processing on both sides. Fixed stand with motorized drawing rollers made of reinforced steel with variable speed. Independent motors for each working group for greater processing control and management of different working pressures. Equipped with two belt units and 4 tracks with transmitting abrasive strips. The control panel with a touch screen with the saving of working programs and the possibility of self-diagnosis by alarm.

The deburring machine GT 13 GECAM is an arrangement of workstations on two sides, which allows for two-sided processing of the edges of parts in one pass. GT machines are designed for enhanced blunting and rounding of the edge of sheet products, including the possibility of processing products under a film, with the presence of a protective layer, etc. The machine uses cassette abrasive brushes with a perpendicular movement of the working units in relation to the movement of the products. The equipment is relevant for use when there is a question of pronounced blunting of the edge of parts, associated with high productivity and the need for uniform processing and care from manual operations. Thanks to the execution of the stations, intensive processing is carried out - each part passes the working tool twice on each side.

Handheld surface grinding machine СUB 60 BB GECAM with two grinding heads and a conveyor belt. Designed for various metal processing processes such as grinding, deburring, rounding and polishing for various types of metals: stainless steel, steel, brass, copper.

Belt centerless grinding and polishing machine 128 DL GECAM  is intended for grinding/polishing pipes and rods of round cross-section. Gecam 128DL has a wide functionality of settings, a number of characteristics and additional options that show its unique capabilities in performing grinding, cleaning and polishing of metal round workpieces.

Belt grinding machine for contact grinding of corners 131 Gecam  is equipped with an adjustable large working surface and a patented radius execution system. Gecam 131 - designed for grinding welded corners on the edges of rectangular blanks in the form of boxes with a welded corner at a maximum height of 150 mm and for performing a radius on flat parts by hand. Extractor (dust collector) of metal dust, tape tensioning and centering system.

Belt grinding machine 134 Gecam for full radii on pipes. Designed as a coupling radii machine, it can produce radii from R=10 to R=150.
Diameter of round pipes up to 150 mm and square sections up to 150 x 150 mm with coupling angles from 15° to 90°. Processing takes place on a hard rubber contact roller mounted on two types
of holders capable of covering the entire range of diameters on request up to 300 mm. Equipped with a dust extraction hood to which a self-filtering cyclone is connected.

Belt grinding machine 135 Gecam  for welds. Gecam 135 - designed for processing metal boxes with a width of up to 800 mm or up to 1530 mm. Provides an additional option of three dust collectors, a grinding head, the function of accepting three positions of the grinding head, a touch control panel. The grinding process is fully automated.

Belt grinding machine 136 Gecam Belt grinding machine for cleaning welds on the edges of welded boxes or for performing radii on flat parts with a maximum length of 400 mm.
Fixed system with movement of the part fixed on the work surface by a prismatic guide  includes a fork with a pair of rollers on which the abrasive belt slides, which performs a radius with oscillation both at angle and at the fulcrum with adjustment to obtain a radius from  R = 1 to R =10.

Machine 143 Gecam with extractor (dust collector) for metal dust and brushes for grinding complete with pipe support. Gecam 143 is intended for removing burrs at the ends of round or square (even, bent) metal blanks cut at an angle of 45 and 90 degrees. The machine cleans the workpiece inside and out in one cycle. 

Orbital belt sander 144 Gecam with belt, specially designed for grinding, cleaning, polishing round or elliptical pipes with a diameter of 10 to 150 mm with a variable bend. Stepless electronic adjustment of speeds from 15 to 75 rpm of the planetary shaft with an electric system of tension and centering of the grinding belt. The machine can be equipped with a metal dust extractor and an automatic feeding system for pipes as additional options.

Vertical belt grinding machine with hood 213 GECAM  is designed for simple and safe processing of parts of various shapes. Gecam 213 has a wide functionality of settings, a number of characteristics and additional options that show its unique capabilities in grinding, cleaning and polishing of metal workpieces. The standard configuration comes with an adjustable easy-removal unit and a large work surface, a belt tension system complete with an adjustable spiral spring and an additional option of a dust collector.

Centreless belt grinding machine is designed for grinding/polishing pipes and rods of round section up to 400mm. Gecam 228 S has a wide functionality of settings, a number of features and additional options that show its unique capabilities in grinding, cleaning and polishing of large metal round workpieces.

Belt grinding machine 334 Gecam  with one speed for grinding with an abrasive belt on a flat surface. Equipped with a removable and adjustable work table, a stand for the cabinet and an electrical system in a waterproof box. Designed for safe processing of parts. It can be in two configurations, with a belt width of 200 mm or 320 mm and can be equipped with an additional option of a dust collector for metal dust.

Belt grinding machine 420 Gecam  complete with an extractor (dust collector) for metal dust with a freely moving belt for grinding. Gecam 420 is intended for deburring, cleaning, polishing and polishing of parts of complex shape by hand. Large overhang with the ability to place the sanding belt vertically or at an angle of 45 degrees to both sides. The tape is tensioned using a spring and special levers.

Grinding and polishing machine 728 Gecam  with a two-speed 400 Volt motor, with a standard electrical system and in a separate waterproof box.

Automatic grinding machine 844 - 845 - 846 Gecam is designed for removing burrs, removing chamfers and processing edges after stamping, laser and plasma cutting. Performs chamfer removal in
one pass from two sides. Can be equipped with a second free belt with vertical feed (845) or contact wheel with horizontal belt feed (846). Provides a powerful exhaust system, a dust collector for metal dust with a removable container.

The G 13 RB8 Gecam deburring machine is ideal for deburring, rounding edges and achieving a perfect finish, thanks to the initial sanding belt for removing excess burrs and a group of carousels with 8 abrasive brushes that rotate both clockwise and counter-clockwise arrows to obtain a uniform result throughout the workpiece. Independent control of working groups through an electronic touch panel, variable speed of working groups for better finishing results. A table with a vacuum system to ensure the tightness of the part during processing.

Constant PASS LINE fixed movable upper beam. Independent motor for each block welded cellular frame made of carbon steel. Large dimensions, lifting and lowering screws, installed at a long distance for greater rigidity and stability. Oscillation of abrasive belts using an electronic sensor with a photocell, adjustment of oscillations. Control of the highly efficient exhaust hood system.
Door bypass switch with key for inspection of feeding and unloading of unmarried table rollers. Grooved pressure rollers with a rubber coating of large diameter, rubberized and anti-slip. Sound insulation on all doors, degree of protection IP54.

The Grinding Deburring machine GCB 25 RR GECAM  is equipped with a double grinding belt and a front table (the extended part is offered on order). Grinding equipment Gecam GCB 25 RR also has a tab for processing products. The machine for removing burrs has a high working capacity with speed control and tensioning pneumatic system. In his tables, an electric drive is provided for connection and transmission, as well as a set of direct lighting at the outlet.

Area of application - for dust collection (when processing materials with the formation of flammable dust.

Surface grinding machine GM11 Stiffelio GECAM for grinding and polishing and for deburring on flat surfaces of metal workpieces after laser, plasma, oxygen, guillotine processing. The machine is designed only in one configuration, without the supply of waste materials to the working area. Completed with only one workstation and group (R) in it.

Belt centerless grinding and polishing machine line GECAM 128DL TRI intended for grinding/polishing pipes and rods of round cross-section. Gecam 128DL has a wide functionality of settings, a number of features and additional options that show its unique capabilities in performing grinding, cleaning and polishing of metal round workpieces.

Belt centerless grinding and polishing machine line  GECAM 128DL TWIN of two centerless belt grinding machines designed for grinding/polishing pipes and rods of round cross-section. Gecam 128DL has a wide functionality of settings, a number of features and additional options that show its unique capabilities in performing grinding, cleaning and polishing of metal round workpieces.

Drilling machine with control FORUS (GB) and brushless motors to simplify the work process, without any manual adjustment, suitable for perpendicular and corner drilling on round pipes, rectangular profiles, square pipes and metal plates of various sizes and made of various materials such as iron, stainless steel, brass, aluminum and titanium.
The machine  is modular and can be supplied with one or two drilling devices.

Drilling machine FORUS EASY, suitable for perpendicular and angle drilling on round pipes, rectangular profiles, square pipes and metal plates of various sizes and made of various materials such as iron, stainless steel, brass, aluminum and titanium.
The drilling unit is very strong and moves on guides made of reinforced hardened steel. Spindle with a diameter of 90 mm. has an ISO 40 chuck, suitable for drills from 5 to 50 mm. The feed of the boring unit is carried out using a circulating screw ball with a brushless motor. The speed of the drill motor is regulated by the inverter equipment.

Sander GO (GB) allows you to sand, satin and process square, rectangular and profiled metal objects of various shapes.
Our device has an abrasive belt system powered by an independent motor-reducer, which allows you to get a better finish surfaces and higher performance of the abrasive belt; this movement is mechanically conceived as a complete rocking head that swings up and down.
The main holding table can be tilted up to 45 ° for further processing on special shaped parts.
The grinding machine can be equipped with a rubber roller and an additional special work table for finishing work on CONCAVE or CONVEX surfaces.
Dust collection is achieved by holes made in the work table.

Belt grinding machine GPS Belt for flat surfaces with a wet working system, suitable for finishing operations on pipes and rods with square and rectangular sections , sheets and plates of stainless steel, iron, aluminum, brass and other metals.
Especially suitable for expansion on laser/plasma or cut sheets.
Sanding of workpieces can also be "dry", in which case a hood is available for collecting dust, which is easily connected to the machine (on request).

Deburring machine GPS Brush (GB) for flat surfaces with “WET” working system, suitable for deburring, brushing and satin finishing on pipes and bars with square and rectangular sections, sheets and plates of stainless steel, iron, aluminum, brass and other metals.
This device is equipped with a brush height regulator and a wear compensation system.
Removal of burrs from workpieces can also be "dry", in this case, an extractor is available to collect dust, which is easily connected to the machine (on request).

Belt grinding machine GPS MODULO (GB)  for flat surfaces, suitable for grinding and finishing pipes and bars with square and rectangular sections, as well as sheets and plates made of stainless steel, iron, aluminum, brass and other metals . Especially suitable for enlarging on laser/plasma or cut sheets.

Orbital machineGPS Orbital (GB) for rounding edges or removing burrs on flat surfaces subject to oxytresis, laser cutting, plasma cutting, stamping or shearing.
This machine allows you to process metal sheets or flat products with max . 300 mm wide. and max. 150 mm high. This device is equipped with a brush height regulator and a wear compensation system.
Deburring of workpieces can also be "dry", in this case, a dust extraction hood is available that easily connects to the machine (on request).

Planetary grinding machine LPC 90 (GB) with abrasive belts for grinding and satin finishing. Straight or bent products made of stainless steel, brass, iron, aluminum and other metals.

Planetary grinding machine LPC 135 (GB) with abrasive belts for grinding and finishing with satin. Straight or bent elements made of stainless steel, brass, iron, aluminum and other metals.

Planetary grinding machine LPS 160 (GB) with abrasive belts for grinding and satin finishing. Straight or bent products made of stainless steel, brass, iron, aluminum or any other metal with a round, oval, elliptical or irregular cross-section.
The main feature compared to other machines is that our unit is equipped with 2&nbsp by independent motors: 1 for rotation of discs and 1 for rotation of abrasive belts.

Absolutely new technology: planetary polishing machine LPS 160-Mirror (GB)  with dispenser for hard paste (optional for liquid paste), for mirror processing and grinding on straight and bent pipes made of stainless steel, brass, iron or any other metal with a round, oval or irregular cross-section, from 5 to 50 mm . For some color applications through abrasive belts also suitable for grinding and preparing surfaces for mirror polishing. The machine is supplied complete with an inverter unit to ensure proper "mirror polishing".

Planetary grinding machine LPC 160VS (GB) with abrasive belts for grinding and satin finishing Straight or bent products made of stainless steel, brass, iron, aluminum or any other metal with a round, oval, elliptical or irregular cross-section.
The main feature compared to other machines is that our unit is equipped with 2 independent motors: 1 for rotating the disc and 1 for rotating the abrasive belts.

Planetary polishing machine LPC 160VS-Mirror (GB) in a special narrow version that works with a liquid paste dispenser only for processing mirrors and polishing straight and bent stainless steel, brass tubes , iron or any other metal having a round, oval or irregular cross-section, from 5 to 50 mm. For some color applications through abrasive belts also suitable for grinding and preparing surfaces for mirror polishing. The machine is supplied complete with an inverter unit to ensure proper "mirror polishing".

Planetary grinding machine LPC 160VS-WET (GB) with abrasive belts for grinding and satin finishing. Straight or bent products of stainless steel, brass, iron, aluminum or any other metal are round, oval, elliptical or irregular in cross-section. Especially suitable for processing on products made of light alloys, aluminum and titanium.
The main feature compared to other machines is that our device is equipped with 2 individual motors: 1 for rotating the disc and 1 for rotating the abrasive belts.

This machine also allows "dry" processing of workpieces, in this case, an easy-to-install dust collection cap can be installed.

Planetary grinding machine LPC 160-WET (GB)  with abrasive belts for grinding and satin finishing. Straight or bent products of stainless steel, brass, iron, aluminum or any other metal having a round, oval, elliptical or irregular cross-section. Especially suitable for processing on products made of light alloys, aluminum and titanium. The main feature compared to other machines is that our unit is equipped with 2 INDIPEN-DENT motors: 1 for rotating discs and 1 for rotating abrasive belts.
This machine also allows "dry" processing of workpieces, in this in this case, you can put an easy-to-install dust cap.

Planetary grinding machine LPC LPC 300 (GB) with abrasive belts for grinding and satin finishing. Straight or bent stainless steel, brass, iron, aluminum or any other metal with round, oval, elliptical or irregular cross-section.
The main feature compared to other machines is that our unit is equipped with 2 independent motors: 1 for rotating the disc and 1 for rotating the abrasive tapes.

Planetary polishing machine LPC 300VS-Mirror (GB) in a special narrow version, working with a liquid paste dispenser, only for processing mirror surfaces and polishing on straight and bent pipes made of stainless steel, brass, iron or any other metal , having a round, oval or irregular cross-section, from 5 to 100 mm. Also suitable for sanding and preparing surfaces for mirror polishing for some colored applications using abrasive belts.
The machine comes complete with an inverter unit to ensure proper "mirror polishing".

Planetary grinding machine LPC 300VS-WET (GB) "wet" with abrasive belts for grinding and satin finishing straight and curved products made of stainless steel, brass, iron or any other metal having a round , oval, elliptical or irregular cross-section. Especially suitable for processing on light alloy, aluminum and titanium products.
The main feature compared to similar products is that our unit is equipped with 2 independent motors: 1 for rotating the disc and 1 for rotating the sanding belts.
This the machine also allows "dry" processing of blanks.

Planetary grinding machine LPC 300-WET (GB) "wet" with abrasive belts for grinding and satin finishing of straight and curved products made of stainless steel, brass, iron or any other metal having round, oval, elliptical or irregular cross-section. Especially suitable for processing on light alloy, aluminum and titanium products.
The main feature compared to similar products is that our unit is equipped with 2 independent motors: 1 for rotating the disc and 1 for rotating the sanding belts.
This the machine also allows "dry" processing of blanks.

Planetary grinding machine LPC 500 (GB)  with abrasive belts for grinding and satin finishing. Straight or bent products of stainless steel, brass, iron, aluminum or any other metal having a round, oval, elliptical or irregular cross-section. The main feature compared to other machines is that our unit is equipped with 2 independent motors: 1 for rotating the disc and 1 for rotating the abrasive belts.

Absolutely new technology: planetary polishing machine LPC 500-Mirror (GB) with the possibility of connecting to a dispenser for liquid paste, for finishing mirrors and grinding on straight and bent tubes made of stainless steel, brass, iron or any of other metal, having a round, oval or irregular cross-section, from 5 to 200 mm. For other applications, thanks to the abrasive belts, it is also suitable for grinding and preparing surfaces for mirror polishing.
The machine is supplied complete with an inverter device for adjusting the speed of the abrasive belts to ensure a proper "mirror polishing".

Planetary grinding machine LPC 500 TE (GB) with abrasive belts, special version with narrow pulleys, suitable for grinding shaped parts, with a bending radius of more than 90 °.
The main feature compared to other machines is that our unit is equipped with 2 independent motors: 1 for rotating the disc and 1 for rotating the abrasive belts.

Planetary grinding machine LPC 500-WET (GB) "wet" with abrasive belts for grinding and satin finishing straight and curved products made of stainless steel, brass, iron or any other metal that has a round, oval, elliptical or irregular cross-section. Especially suitable for processing on products made of light alloys, aluminum and titanium.
The main feature compared to similar ones is that our unit is equipped with 2 independent motors: 1 for rotating the disc and 1 for rotating the grinding belts.
This machine also allows "dry" processing of workpieces, in which case an easy-to-install dust collection cap can be provided.

Planetary grinding machine LPC 300/S (GB), consisting of N°2 grinding units on the same STRUCTU-RE: the first head is for grinding, and the second head is for processing straight parts with round, oval, elliptical or irregular cross-section, made of stainless steel, iron, brass and other metals.
This line is supplied ready-to-run with automatic feeding systems suitable for straight tubes.

Planetary grinding machine LT 130/S (GB) consisting of N°2 grinding blocks on the same STRUCTU-RE: the first head is intended for grinding, and the second head is for processing straight parts with round, oval , elliptical or irregular cross-section, made of stainless steel, iron, brass and other metals.
This line is supplied ready to work with front and rear SELFCENTERING feed system, also suitable for taper and shaped parts.

Planetary grinding machine LT 200/S (GB), consisting of two processing units on the same structure: the first head is intended for grinding, and the second head is for processing straight parts with round, oval, elliptical or irregular cross-section, made of stainless steel, iron, aluminum, brass and other metals. This line comes ready-to-run with front and rear SELFCENTERING feed systems, also suitable for tapered and shaped parts.

Planetary grinding machine LT 130-WET (GB) "wet" for high-volume grinding and finishing requirements of straight tubes made of stainless steel, brass, iron, aluminum or any other metal, having a round, oval, elliptical or irregular cross-section. Especially suitable for processing light alloy, aluminum and titanium products.
This machine is supplied ready to use with a SELFCENTERING feed system, also suitable for conical and shaped parts. This machine also allows for "dry" processing of workpieces, in which case you can install an easy-to-install dust collection cap.

Grinding machineNOK 150 (GB) suitable for performing cutting and grooving on pipes, bars, profiles with round, square, rectangular and irregular sections.
The standard machine is supplied with the following equipment:
• Side tilt clamping device for making cuts with angles 15°-30°-45°-60° on pipes with a diameter of 20 to 150 mm.
• Working slot for horizontal grinding.
• The speed of rotation of the grinding belt (2800 rpm).
On request, to increase the working capabilities of the machine, additional equipment can be added:
• Centerless preparation system for polishing round pipes.
• Set for "wet" processing.
• Double cutting speed of the abrasive belt (1400-2800 rpm).

The machine for deburring ROTOR-200 (GB) inside and outside "burrs and sharp edges" at the ends of parts subjected to cutting processes.
It is also possible to "remove burrs" from round and oval pipes, square and rectangular sections, irregular profiles made of iron, steel, stainless steel, aluminum and plastic.

Belt grinding machine SYRIO (GB) is suitable for grinding and finishing on large pieces of square, rectangular section, plates or profiled metal objects of various sizes and metal boxes or structures. The machine is equipped with a table that can be electrically adjusted in height ( for parts, max. Weight kg 180).
The standard version is suitable for processing objects with max. 2500 mm long.
Moreover, it can be equipped with a double speed abrasive belt (9-18 m/s) or inverter equipment to adjust the speed from 10 to 25 m/s.

Special planetary belt grinding line LT TITAN 4 is designed for grinding/polishing pipes of round section. The LT TITAN 4 line has a wide functionality of settings, a number of characteristics and additional options that show its unique capabilities in performing grinding, cleaning and polishing of metal round workpieces.

Compact portable pendulum circular saw K 225 MACC with a disc with a diameter of 225 mm and a maximum clamp width of 70 mm. This saw allows you to cut pipes from non-ferrous and non-ferrous metals or other soft materials (plastic, PVC, wood, etc.). Also, the machine is equipped with a special pump and filter for supplying coolant. The total weight of the machine is 41 kg, and the machine itself is easily detached from the steel casing, which facilitates transportation to the place of production.

Compact portable pendulum circular saw K 225 MACC with a disc with a diameter of 225 mm and a maximum clamp width of 70 mm. This saw allows you to cut pipes from non-ferrous and non-ferrous metals or other soft materials (plastic, PVC, wood, etc.). Also, the machine is equipped with a special pump and filter for supplying coolant. The total weight of the machine is 41 kg, and the machine itself is easily detached from the steel casing, which facilitates transportation to the place of production.

Compact portable pendulum band saw MINI CAT MACC is designed for cutting metal profile, corner, pipes and rods. MINI CUT - compact portable band saw machine for household and  small-scale application.

Semi-automatic disc cutting machine NEW 350 S MACC  with a disc with a diameter of 350 mm and a maximum clamping width of 120 mm. Two cutting speeds for maximum productivity. This saw allows you to cut pipes from non-ferrous and non-ferrous metals or other soft materials (plastic, PVC, wood, etc.). Also, the machine is equipped with a special pump and filter for supplying coolant. The total weight of the machine is 280 kg, and the machine itself is easily detached from the steel casing, which facilitates transportation to the place of production.

Semi-automatic disc cutting machine NEW 350 E MACC with a disc with a diameter of 350 mm and a maximum clamping width of 120 mm. Two cutting speeds for maximum productivity. This saw allows you to cut pipes from non-ferrous and non-ferrous metals or other soft materials (plastic, PVC, wood, etc.). Also, the machine is equipped with a special pump and filter for supplying coolant. The total weight of the machine is 280 kg, and the machine itself is easily detached from the steel casing, which facilitates transportation to the place of production.

New automatic CNC cutting line. NEW LINE-350 for cutting at an angle of 90°,

Centreless grinding machine KS 100-BA Loeser is used for dry grinding of various materials. The "quick replacement" system allows you to replace the grinding belt and components in the shortest possible time. For example, replace a hard contact circle for high cleaning with a soft one - for a good finish. The use of fleece, abrasive and polishing tapes is allowed.

Belt grinding and polishing machine KS 363 Loeser  is intended for cleaning, removing defects, removing burrs, grinding and polishing metal blanks. The Loeser KS 363 has a number of
features and additional options that show its unique capabilities in contact roller or free belt sanding.

Centreless grinding machine KS 100 Loeser is used for dry grinding of various materials. The "quick replacement" system allows you to replace the grinding belt and components in the shortest possible time. For example, replace a hard contact circle for high cleaning with a soft one - for a good finish. The use of fleece, abrasive and polishing tapes is allowed.

Support for sanding and polishing with a belt Loeser SO 0337