Dyne Orbital-Spirit Orbital Sander, 6” (152 mm), with automatic dust extraction 59028

Features of the machine
1. Includes a weight-adjusted, low-profile sanding sole made of quality polyurethane. The gray color of the lever indicates the ø 3/16" (5 mm) orbit, for general grinding.
2. An engine assembly (sold separately) is additionally offered to reduce downtime due to regular maintenance. More power: the air motor produces 12,000 rpm. The rotor is equipped with five blades, which increases the useful power (0.25 hp / 186 W). The composite rotor has a more advanced lubrication system, thanks to which the blades last longer. Smaller volumes of air (14 cubic feet or 396 liters per minute) are used to more effectively maintain maximum power.
3. The convenient platform offers additional support for the hand and wrist, increasing comfort for the operator. Also offers increased protection against the release of cold air. (the platform is removable). Order platform 59330  separately to install on existing tools!
4. The lever of the regulator in the pressed position is below the level of the body overlay, which eliminates the pressure point on the palm of the operator. The Dynorbital-Spirit lever is made of a composite material for insulation from cold air. The lever is color-coded to indicate the tool's orbit. Easy maintenance, easy conversion into a tool with dust extraction. Easy replacement of muffler parts for convenient maintenance. Low noise level. The muffler system reduces the level of exhaust noise.
5. The speed controller allows you to control the speed of the tool with your thumb. The lightweight air motor block is ideal for grinding vertical and upper surfaces. High-precision single block of the engine shaft and counterweight. A high-quality double-row sole bearing, protected by a unique V-shaped seal, extends the life of the bearing and reduces vibration. Precisely balanced, weight-matched sanding pad with one-piece hub. Dynabraid soles made of high-quality polyurethane ensure more uniform operation and a minimum level of vibration.

Specification
Outsole diameter, inches (mm) 6" (152)
Tool spindle thread: 5/16"-24
Orbit diameter in inches (mm): 3/16" (5)
No-load speed: 12,000
HP power (W): 0.25 (186)
Exhaust type: Rear
Maximum Airflow at 90 psi: Standard Cubic Pounds Per Minute (L/min): 14 (396)
Hose ID, inch (mm): 1/4" (6)
Length, in inches (mm): 9" (229)
Height, in inches (mm): 3-1/2" (89)
Weight of 1 piece: 0.69 kg