Dynabrade

Features of the machine
1. 1.3 hp low-center face scraper, ideal for quick weld removal and coating removal, large-scale filleting, as well as rust and scale removal.
2. 12000 rpm, spindle thread M14 x 2.
3. The tool provides for the use of additional wheels with a reduced center, type 27, ø127 mm (5") and a center hole of 22 mm (7/8").
4. Includes wheel cover  25215, support flange 25262 and fixed flange 53696

Features of the machine

1. For use with the 180 mm (7") mandrel 50152 (not included), which includes a mounting kit. Provides for the use of additional abrasive discs ø180 mm (7‘) and a 22 mm (7/8’) centre hole.

2. The 1.3 HP (970 W) Dynabride angle grinder offers many possibilities for deburring and material removal in sectors such as metal and stainless steel fabrication, concrete, stone, forged metal and general welding. Designed to meet Dynabride's quality standards, these tools offer a wide range of features that increase efficiency and operator comfort! Side anti-vibration handle is specially designed to reduce vibration for the operator. Can be mounted on the left or right hand side. The rotary system provides 360-degree rotation, which allows the exhaust to be directed away from the operator.

3. Cast aluminium body construction; handle made of solid aluminium. Control lever with safety catch prevents the tool from being switched on accidentally. Lever without sharp edges or sharp corners.

4. The wick-type lubrication system extends the life of the gears through a simple lubrication method. All models include gear oil and a gear lubrication syringe. The insulated control handle reduces the flow of cold air to the operator's hand. The handle position is adjustable for increased comfort and efficiency.

Features of the machine
1. Dynorbital Suprim without dust pick-up includes a weight-adjusted, low-profile sanding sole made of quality polyurethane. In addition, a kit is offered that allows you to easily rebuild the tool to work with an automatic or centralized dust removal system. Orbit ø 3/16" (5 mm).
2. Dynorbital Supreme models operate at a speed of 12,000 rpm. The rotor has five blades, which provide higher useful power. The complex rotor is more powerful and has a better lubrication system, which ensures a longer service life of the blades.
3. The composite base is non-slippery and protects the rubberized body from the cold. The pneumatic motor is suspended on vibration-absorbing rubber rings to reduce vibration to a minimum.
4. The front double-row balancer bearing with triple sealing is protected from grinding dust, which extends the service life and reduces maintenance requirements; repair kit 57098 provides a simple replacement.
5. The convenient platform offers an additional support for the hand and wrist, increasing the operator's comfort. Also offers increased protection against the release of cold air (the platform is removable). Order the platform separately to install on existing tools!

Features of the machine
1. The Dainorbital Suprim kit with automatic dust extraction includes a weight-adjusted low-profile sanding pad made of high-quality polyurethane. The option of connecting to an additional portable autonomous dust removal system.
Orbit ø 3/16" (5 mm).
2. Dynorbital Supreme models operate at a speed of 12,000 rpm. The rotor has five blades, which provide higher useful power. The complex rotor is more powerful and has a better lubrication system, which ensures a longer service life of the blades.

Features of the machine
1. Dynorbital Suprim for centralized dust extraction includes a weight-adjusted, low-profile sanding pad made of quality polyurethane. A ø 1" vacuum nozzle is provided for easy connection to centralized dust extraction systems. Orbit ø 3/16" (5 mm).
2. Dynorbital Supreme models operate at a speed of 12,000 rpm. The rotor has five blades, which provide higher useful power. The complex rotor is more powerful and has a better lubrication system, which ensures a longer service life of the blades.
3. The composite base is non-slip and the rubberized body protects against the cold. The pneumatic motor is suspended on vibration-absorbing rubber rings to reduce vibration to a minimum.
4. The front double-row balancer bearing with triple sealing is protected from grinding dust, which extends the service life and reduces maintenance requirements; repair kit 57098 provides a simple replacement.
5. Effective dust collection in centralized systems. Dust particles are removed from the pneumatic motor (which reduces the degree of its pollution) through a clean channel. The convenient platform offers an additional support for the hand and wrist, increasing comfort for the operator. Also, increased protection against the release of cold air (the platform is removable). Order platform 59330 separately for installation on existing tools.

Features of the grinder
1. Dynaloc 12000 rpm - actually two tools in one; a rotary angle grinder can be easily converted into an orbital-eccentric one with the help of a switch.
2. Ideal for working with metals, excellent for working with composite materials.
3. Very suitable for car repair work such as paint stripping and leveling.
4. Also used for leveling glued seams on hard surfaces such as, for example, Corian. The switch is recessed into the handle to avoid accidental activation.
5. Includes a low-profile sanding sole made of high-quality "velcro" polyurethane.

Features of the machine
1. It has a weight-adjusted low-profile grinding sole made of high-quality polyurethane. Additionally, a tool conversion kit is offered to work with an automatic or centralized dust extraction system. The gray color of the lever indicates the ø 3/16” (5 mm) orbit, for general grinding.
2. An engine assembly (sold separately) is additionally offered to reduce downtime due to regular maintenance. More power: the pneumatic motor produces a full 12,000 rpm. The rotor is equipped with five blades, which increases the useful power (0.25 hp / 186 W). The composite rotor has a more advanced lubrication system, thanks to which the blades last longer. Smaller volumes of air (14 cubic feet or 396 liters per minute) are used to more effectively maintain maximum power.
3. The convenient platform offers additional support for the hand and wrist, increasing comfort for the operator. Increased protection against the release of cold air is also offered (the platform is removable). Order platform 59330 separately for installation on existing tools!
4. The regulator lever in the pressed position is below the level of the body overlay, which eliminates the pressure point on the palm of the operator. The Dynorbital-Spirit lever is made of a composite material for insulation from cold air. Color coding of the lever is provided to indicate the orbit of the tool. Easy maintenance, easy conversion into a tool with dust extraction. Easy replacement of muffler parts for convenient maintenance. Low noise level. The muffler system reduces the level of exhaust noise.
5. The speed controller allows you to control the speed of the tool with your thumb. The lightweight air motor block is ideal for grinding vertical and upper surfaces. High-precision single block of the engine shaft and counterweight. A high-quality double-row sole bearing, cleaned with a unique V-shaped oil seal, extends the service life of the bearing and reduces vibration. Precisely balanced, weight-matched sanding pad with one-piece hub. Dynabraid soles made of high-quality polyurethane ensure more uniform operation and a minimum level of vibration.

Features of the machine
1. Includes a weight-adjusted, low-profile sanding sole made of quality polyurethane. The gray color of the lever indicates the ø 3/16" (5 mm) orbit, for general grinding.
2. An engine assembly (sold separately) is additionally offered to reduce downtime due to regular maintenance. More power: the air motor produces 12,000 rpm. The rotor is equipped with five blades, which increases the useful power (0.25 hp / 186 W). The composite rotor has a more advanced lubrication system, thanks to which the blades last longer. Smaller volumes of air (14 cubic feet or 396 liters per minute) are used to more effectively maintain maximum power.
3. The convenient platform offers additional support for the hand and wrist, increasing comfort for the operator. Also offers increased protection against the release of cold air. (the platform is removable). Order platform 59330  separately to install on existing tools!
4. The lever of the regulator in the pressed position is below the level of the body overlay, which eliminates the pressure point on the palm of the operator. The Dynorbital-Spirit lever is made of a composite material for insulation from cold air. The lever is color-coded to indicate the tool's orbit. Easy maintenance, easy conversion into a tool with dust extraction. Easy replacement of muffler parts for convenient maintenance. Low noise level. The muffler system reduces the level of exhaust noise.
5. The speed controller allows you to control the speed of the tool with your thumb. The lightweight air motor block is ideal for grinding vertical and upper surfaces. High-precision single block of the engine shaft and counterweight. A high-quality double-row sole bearing, protected by a unique V-shaped seal, extends the life of the bearing and reduces vibration. Precisely balanced, weight-matched sanding pad with one-piece hub. Dynabraid soles made of high-quality polyurethane ensure more uniform operation and a minimum level of vibration.

Features of the machine
1. Includes a weight-adjusted, low-profile sanding sole made of quality polyurethane. The gray color of the lever indicates the ø 3/16" (5 mm) orbit, for general grinding.
2. An engine assembly (sold separately) is additionally offered to reduce downtime due to regular maintenance. More power: the air motor produces 12,000 rpm. The rotor is equipped with five blades, which increases the useful power (0.25 hp / 186 W). The composite rotor has a more advanced lubrication system, thanks to which the blades last longer. Smaller volumes of air (14 cubic feet or 396 liters per minute) are used to more effectively maintain maximum power.
3. The convenient platform offers additional support for the hand and wrist, increasing comfort for the operator. It also offers increased protection against the release of cold air (the platform is removable). Order platform 59330 separately for installation on existing tools!
4. The regulator lever in the pressed position is below the level of the body overlay, which eliminates the pressure point on the palm of the operator. The Dynorbital-Spirit lever is made of a composite material for insulation from cold air. The lever is color-coded to indicate the tool's orbit. Easy maintenance, easy conversion into a tool with dust extraction. Easy replacement of muffler parts for convenient maintenance. Low noise level. The muffler system reduces the level of exhaust noise.
5. The speed controller allows you to control the speed of the tool with your thumb. The lightweight air motor block is ideal for grinding vertical and upper surfaces. High-precision single block of the engine shaft and counterweight. A high-quality double-row sole bearing, protected by a unique V-shaped seal, extends the life of the bearing and reduces vibration. Precisely balanced, weight-matched sanding pad with one-piece hub. Dynabraid soles made of high-quality polyurethane ensure more uniform operation and a minimum level of vibration.

Pneumodrum features
1. Rubber pneumatic drums repeat the contour of the processed surface.
2. Dynabreid pneumatic drums - rubber pneumatic drums , designed to work with various Dynabraid tools. The speed of the tool should not exceed the maximum operating speed of the accessory.
3. After installing the abrasive tape and pumping it up to the required hardness,   pneumatic drums are ideal for various cleaning and finishing options.
4. Dynabraid pneumatic drums allow the use of sanding belts with different bases for use on metal, wood, plastic, ceramics, fiberglass and composites.
5. Air pump 98130 is included in the kit of all pneumatic drums Dynavil and Dynakushen.

Features of the pneumatic drum
1. Rubber pneumatic drums repeat the contour of the processed surface.
2. Dynabraid pneumatic drums - rubber pneumatic drums designed for working with various Dynabraid tools. The speed of the tool should not exceed the maximum operating speed of the accessory.
3. After installing the abrasive tape and pumping it to the required hardness, pneumatic drums are ideal for various cleaning and finishing options.
4. Dynabraid pneumatic drums are offered for the use of sanding belts on a non-woven nylon base for use on metal, wood, plastic, ceramics, fiberglass and composites.
5. Pneumatic pump 98130 is included in the set of all Dynavil and Dynakushen pneumatic drums.

Features of the pneumatic drum
1. Rubber pneumatic drums repeat the contour of the treated surface.
2. Dynabraid pneumatic drums - rubber pneumatic drums designed for working with various Dynabraid tools. The speed of the tool should not exceed the maximum operating speed of the accessory.
3. After installing the abrasive tape and pumping it up to the required hardness, pneumatic drums are ideal for various cleaning and finishing options.
4. Dynabraid pneumatic drums provide for the use of sanding belts on a non-woven nylon base for use on metal, wood, plastic, ceramics, fiberglass and composites.
5. Pneumatic pump 98130 is included in the set of all Dynavil and Dynakushen pneumatic drums

Features of the grinder
1. Extreme Capability: The new engine design has the highest power-to-weight ratio in the industry, with 0.3 hp. at 1.8 lbs. Most consistent speed under load in the industry, operating at 92% of rated tool speed. New rotor design increases power with less friction.
2. Extreme Comfort: Ergonomic design with built-in comfort platform for greater wrist support and overall operator comfort. Soft grip combined with a hard composite base body for maximum comfort and durability. An integrated throttle lever eliminates pinch and pressure points on the operator's palms.

Features of the machine
1. Powerful 0.15 hp air motor. (112 W), 10,000 rpm allows for a variety of jobs using only 13 standard cubic pounds (368 liters) per minute at 90 psig (6.2 bar).
2. The precise 3/32" orbit movement is ideal for controlled and ultra-fine machining of various surfaces. Compact and ideal for all operators, including those with small palm sizes.
3. Due to the special design and according to the test results, the tool produces less vibration than any competing model! Thanks to the light weight, the fatigue of the hands and forearms is reduced. The tool is perfect for processing vertical surfaces. The rectangular shape allows you to grind corners inaccessible to round soles.
4. The Dynabag II central vacuum system has a 1" OD vacuum port ready for connection to an external vacuum source.
5. Includes 56323 Delta Vacuum Sanding Pad 99mm wide (at wide end) and 143mm long (approx 4"x 5-3/4") which has seven vacuum holes. The unique platform has curved edges for sanding round areas and a pointed end for finishing tight corners. The convenient platform offers an additional support for the hand and wrist, increasing comfort for the operator. It also offers increased protection against the release of cold air (the platform is removable). Order platform 59330  separately to install on existing tools!

Features of the machine
1. A powerful 0.15 hp air motor. (112 W), 10,000 rpm allows for a variety of jobs using only 13 standard cubic pounds (368 liters) per minute at 90 psig (6.2 bar).
2. The precise 3/3" orbit movement is ideal for controlled and ultra-fine machining of various surfaces. Compact and ideal for all operators, including those with small palm sizes.
3. Due to the special design and according to the test results, the tool produces less vibration than any competing model! Thanks to the light weight, the fatigue of the hands and forearms is reduced. The tool is perfect for processing vertical surfaces. The rectangular shape allows you to grind corners inaccessible to round soles.
4.  The Dynabag II central vacuum system has a 1" OD vacuum port ready for connection to an external vacuum source.
5. Includes a 56319 vacuum sanding pad 80mm wide by 130mm long (approx. 3-1/4"x 5"), with eight vacuum holes. The convenient platform offers an additional support for the hand and wrist, increasing comfort for the operator. It also offers increased protection against the release of cold air (the platform is removable). Order platform 59330 separately for installation on existing tools!

Features of the machine
1. A powerful 0.15 hp air motor. (112 W), 10,000 rpm allows for a variety of jobs using only 13 standard cubic pounds (368 liters) per minute at 90 psig (6.2 bar).
2. The precise 3/32" orbit movement is ideal for controlled and ultra-fine machining of various surfaces. Compact and ideal for all operators, including those with small palm sizes.
3. Due to the special design and according to the test results, the tool produces less vibration than any competing model! Thanks to the light weight, the fatigue of the hands and forearms is reduced. The tool is perfect for processing vertical surfaces. The rectangular shape allows you to grind corners inaccessible to round soles.
4. Dust collection in Dynabag II occurs automatically through the exhaust system. The tool has a vacuum nozzle with an external ø 1" with the possibility of connecting to additional dust removal systems.
5. Includes a 56319 vacuum sanding pad 80mm wide by 130mm long (approx. 3-1/4"x 5"), with eight vacuum holes. The convenient platform offers an additional support for the hand and wrist, increasing comfort for the operator. It also offers increased protection against the release of cold air (the platform is removable). Order platform 59330 separately for installation on existing tools!

Features of the machine

1. Dynabrade Die Grinder Series - 4 hp (298 W) with extended models for reaching previously inaccessible areas. Offering 3‘ (76 mm) or 6’ (152 mm) extended shafts, these tools allow you to efficiently machine in deep part channels and difficult passages!

2. Ideal for deburring, fast surface cleaning, surface preparation, finishing and polishing. Carbide burrs, abrasive stones, grit and moulded abrasives can be mounted on the tool.

3. The shaft diameter of only (3/4") 19 mm fits into the tightest of spaces! The throttle-controlled motor maintains speed under load.

4. Ergonomic tool body with comfortable soft-touch handle. The safety throttle lever prevents accidental start-up.

Features of the machine

1. Stripping, filleting, smoothing and polishing of metals, plastics, fibreglass, composites, rubber, glass, etc. Stripping with a contact roller or backing plate; finishing with the overhanging part of the belt.

2. The tool set includes a 40320 Dynafile II with a contact pad 11206 and additional contact pads 11203 and 11204.

3. The set also includes eight popular abrasive belts and the collet 50010 (1/4") for burrs, along with wrenches 95262 and 95281.

4. All items come in a robust carrying case.

Features of the machine

1. The world-famous Dynafile tool for stripping, filing, smoothing, polishing, finishing - and more! Sanding with the contact roller or backing pad. Finishing with the overhanging part of the belt. For use on metals, plastics, fibreglass, composites, rubber, glass and stone.

2. The tool is supplied with a contact console 11218 for standard load. It also allows for the use of various additional contact arms. Work areas as small as 3/8’ in diameter. Excellent control allows for the use of 1/8‘, 1/4’ or 1/2‘ wide abrasive belts with a length of 24’.

3. The motor can be easily adjusted to the most convenient position of the hand lever. Quick and easy belt change. Hard and soft backing pads can be mounted on the contact arms for aggressive deburring or for polishing contoured surfaces.

4. Includes the DynaFile 14000 with five popular contact pads and a set of abrasive belts in a sturdy box. Includes the 11213, 11216, 11218, 11219 and 11231 contact pads.

Features of the machine:

1. Pneumatic finishing machine Dynamite for matting, deburring and polishing stainless steel, aluminium, carbon steel and composites.

2. 1800 rpm, 6’ extension, 1 hp. The tool comes with a combination clamping mandrel

ø 5/8‘ or 1’ for discs up to 3‘ wide with a ø 5/8’ or 1’ centre hole.

3. Any Dynacushen pneumatic drum with a 5/8’ bore (e.g. 92938) can be fitted.

4. Soft grip handle provides comfort for the operator.

Features of the machine:

1. The Dainisher Pneumatic Finishing Machine delivers an excellent finish on metal.

2. 3400 rpm, 0.7 hp Great for lapping and finishing stainless steel and other metals, leaves a longitudinal scratch pattern (‘satin’ effect).

3. The clamping mandrel (ø3/4") allows for the installation of various abrasives and accessories.

4. Variable speed control and throttle lever with safety catch.

5. Ideal for use with the optional Dynacushen air drum (ø5‘, width 3-1/2’)