Dyne Orbital-Spirit 6" orbital eccentric sander with dust extraction
Orbital eccentric sander Dinorbital-Spirit 6" (152 mm) ideal for professional sanding, it features a low-profile, weight-matched polyurethane sanding pad for minimal vibration and high performance . The gray adjustment lever indicates a 3/16" (5 mm) orbit, making the tool versatile for general grinding of any surfaces.
The grinder is compatible with a centralized system dust removal, which significantly reduces the level of dust in the workplace, improving working conditions. A separate motor assembly is available to minimize maintenance downtime. The powerful pneumatic motor of the grinder provides 12,000 rpm, which increases productivity and reduces work time.
Innovative rotor with five blades increases useful power (0.25 hp / 186 W), ensuring a long service life of the tool. Composite rotor uses an advanced lubrication system, so it consumes less air (14 cu ft or 396 l/min) while keeping maximum power.
The grinder is equipped with a removable platform to support the brush and the operator's seat, which reduces fatigue during long work. The platform protects against the release of cold air, adding comfort when working in any conditions. 59330 platform for other tools can be purchased separately.
Speed controller allows you to easily control the operation of the tool, which is ideal for grinding vertical and overhead surfaces. The regulator lever, made of composite material, provides insulation from cold air, which reduces the load on the operator's palm. Easy maintenance and low noise thanks to the built-in muffler system make this sander convenient and efficient.
Polyurethane sole provides smooth operation, reduced vibration and increased bearing life. The high-quality double-row sole bearing is protected by a unique V-shaped seal, which reduces vibration and ensures long-term uninterrupted operation of the tool.
Ordering in our store Stark Abrasive orbital eccentric grinder Dynorbital-Spirit – it's a choice for performance, convenience and durability.
Features of the machine
1. The Dainorbital Suprim kit with automatic dust extraction includes a weight-adjusted low-profile sanding pad made of high-quality polyurethane. The option of connecting to an additional portable autonomous dust removal system.
Orbit ø 3/16" (5 mm).
2. Dynorbital Supreme models operate at a speed of 12,000 rpm. The rotor has five blades, which provide higher useful power. The complex rotor is more powerful and has a better lubrication system, which ensures a longer service life of the blades.
Features of the machine
1. Includes a weight-adjusted, low-profile sanding sole made of quality polyurethane. The gray color of the lever indicates the ø 3/16" (5 mm) orbit, for general grinding.
2. An engine assembly (sold separately) is additionally offered to reduce downtime due to regular maintenance. More power: the air motor produces 12,000 rpm. The rotor is equipped with five blades, which increases the useful power (0.25 hp / 186 W). The composite rotor has a more advanced lubrication system, thanks to which the blades last longer. Smaller volumes of air (14 cubic feet or 396 liters per minute) are used to more effectively maintain maximum power.
3. The convenient platform offers additional support for the hand and wrist, increasing comfort for the operator. Also offers increased protection against the release of cold air. (the platform is removable). Order platform 59330 separately to install on existing tools!
4. The lever of the regulator in the pressed position is below the level of the body overlay, which eliminates the pressure point on the palm of the operator. The Dynorbital-Spirit lever is made of a composite material for insulation from cold air. The lever is color-coded to indicate the tool's orbit. Easy maintenance, easy conversion into a tool with dust extraction. Easy replacement of muffler parts for convenient maintenance. Low noise level. The muffler system reduces the level of exhaust noise.
5. The speed controller allows you to control the speed of the tool with your thumb. The lightweight air motor block is ideal for grinding vertical and upper surfaces. High-precision single block of the engine shaft and counterweight. A high-quality double-row sole bearing, protected by a unique V-shaped seal, extends the life of the bearing and reduces vibration. Precisely balanced, weight-matched sanding pad with one-piece hub. Dynabraid soles made of high-quality polyurethane ensure more uniform operation and a minimum level of vibration.
Features of the grinder
1. Dynaloc 12000 rpm - actually two tools in one; a rotary angle grinder can be easily converted into an orbital-eccentric one with the help of a switch.
2. Ideal for working with metals, excellent for working with composite materials.
3. Very suitable for car repair work such as paint stripping and leveling.
4. Also used for leveling glued seams on hard surfaces such as, for example, Corian. The switch is recessed into the handle to avoid accidental activation.
5. Includes a low-profile sanding sole made of high-quality "velcro" polyurethane.
Features of the machine
1. Dynorbital Suprim without dust pick-up includes a weight-adjusted, low-profile sanding sole made of quality polyurethane. In addition, a kit is offered that allows you to easily rebuild the tool to work with an automatic or centralized dust removal system. Orbit ø 3/16" (5 mm).
2. Dynorbital Supreme models operate at a speed of 12,000 rpm. The rotor has five blades, which provide higher useful power. The complex rotor is more powerful and has a better lubrication system, which ensures a longer service life of the blades.
3. The composite base is non-slippery and protects the rubberized body from the cold. The pneumatic motor is suspended on vibration-absorbing rubber rings to reduce vibration to a minimum.
4. The front double-row balancer bearing with triple sealing is protected from grinding dust, which extends the service life and reduces maintenance requirements; repair kit 57098 provides a simple replacement.
5. The convenient platform offers an additional support for the hand and wrist, increasing the operator's comfort. Also offers increased protection against the release of cold air (the platform is removable). Order the platform separately to install on existing tools!
