LAB OIL 100WT is a water-soluble agent for protection against corrosion of the emulsion type. The presence of wax in the product provides the necessary lubricating properties to meet the requirements of the automotive industry.
Application
LAB OIL 100WT combines the properties of good protection of ferrous metals from corrosion, excellent emulsification with water and has good properties of protecting the environment and the workplace of operators. LAB OIL 100WT does not contain barium compounds.
LAB OIL 100WT has been developed to provide excellent emulsion resistance to alkaline or acidic contaminants encountered in phosphating processes, as conventional water-based corrosion inhibitors often have extremely poor resistance to alkaline or acidic contaminants.
Concentration: 5-30% by volume.
Operating temperature: 60°C - 65°C
Immersion time: 1-3 minutes.
Preparation of the composition:
ALWAYS ADD LAB OIL 100WT TO WATER.
Fill the tank 2/3 with clean warm water (40-50 ° C). To facilitate emulsification, it is recommended to use heated water. Add the required amount of LAB OIL 100WT concentrate. Mix thoroughly. Heat to desired operating temperature.
Maximum corrosion resistance will be achieved when the concentration of LAB OIL 100WT is maintained at 20-30% by volume.
Using a LAB OIL 100WT bath at a temperature of 60°C or higher will pasteurize the emulsion and prevent bacterial growth.
Equipment
Tanks for LAB OIL 100WT can be made of ordinary steel. Solutions can be heated by steam, gas or heated by immersion electric heaters.
Properties and benefits
Approval:
• GM Spec GMW3179 Code G when used with DuBois Ultraphos 1224 or with Ultraphos 1500C.
• Chrysler PS-80 after phosphate coating.
Technical characteristics:
• Base: Emulsion
• Color: Visual brown
• Flash point: ASTM D93
• Recommended concentration: 5 – 30%
• Materials: Black
• % VOC: (volatile organic compounds)
• Coating thickness: (approx.) 5 µm
• Coating characteristics: Oily/waxy
• % Non-volatility: ASTM D2369 mod. 26 (30% solution)
• Water displacement: No
• Neutralization of fingerprints: No
• Coverage: (approx.) M2/l 49
• Type of protection: Indoor storage
• Application temperature: 60-65°C
• Individual protection time: 3 – 12 months
• Application method: Immersion
• Coating removal method: Alkaline cleaner
• Notes: Stir before application
Storage conditions
Store at a temperature from 5°C to 35°C in the original container.
Packaging
20, 200 and 1000 liters.
Safety Data Sheets
When using this product, the safety data sheet should be consulted for specific health, safety and environmental information.
Coolant is not just "water for cooling." In the grinding process, it acts as a technological lubricant that directly affects the service life of the abrasive belt and the final quality of the part.
Concentration is one of the most critical operational parameters. Why shouldn't you work "by eye," and how do you find the perfect balance? Let's dive in.
A water-soluble corrosion inhibitor, of the emulsion type, usually contains anti-corrosion substances dissolved in water. This type of agent can be used to protect metal surfaces from corrosion by creating a protective layer on their surface.
Lubricating and cooling fluids (LUFs) – they are important components for many industrial processes. They provide lubrication, cooling and protection of equipment from wear.
