All goods
Cooling ribs reduce the amount of heat released during grinding. Cold grinding extends the service life of the abrasive. Provides a significant increase in productivity and maximum material removal, especially with the AF890. Provides selective grinding with a clearly defined grinding zone. It is recommended for flat workpieces and very difficult operating conditions.
Cooling ribs reduce the amount of heat released during grinding. Cold grinding extends the service life of the abrasive. Provides a significant increase in productivity and maximum material removal, especially with the AF890. Provides selective grinding with a clearly defined grinding zone. It is recommended for flat workpieces and very difficult operating conditions.
Velour backing for use on medium and high speed angle grinders.
Lining on a velor base with a layer of porous rubber 12 mm thick. For use on low- and medium-speed angle grinders.
Special lining for discs made of non-woven material. For use on low- and medium-speed angle grinders.
Special backing for non-woven discs KV707K, ø 125 mm with a central hole ø 22 mm. For use on low- and medium-angle grinding machines.
DURAWAX is a milky brown synthetic water-based wax emulsion that must be applied to a cleaned steel surface or coatings such as oxide or phosphate coatings. The resulting film is extremely dry and glossy, which makes the appearance. Most surfaces are very attractive.
The mobile belt sander is designed for grinding/polishing sheet material and removing weld seams on a flat surface. The Scantool 75FG is a simple
and reliable machine that is practical to use and has been perfectly designed for for a quick abrasive belt change.
Features of the machine
1. The world-famous Dynafile tool for stripping, filing, smoothing, polishing, finishing - and more! Sanding with the contact roller or backing pad. Finishing with the overhanging part of the belt. For use on metals, plastics, fibreglass, composites, rubber, glass and stone.
2. The tool is supplied with a contact console 11218 for standard load. It also allows for the use of various additional contact arms. Work areas as small as 3/8’ in diameter. Excellent control allows for the use of 1/8‘, 1/4’ or 1/2‘ wide abrasive belts with a length of 24’.
3. The motor can be easily adjusted to the most convenient position of the hand lever. Quick and easy belt change. Hard and soft backing pads can be mounted on the contact arms for aggressive deburring or for polishing contoured surfaces.
4. Includes the DynaFile 14000 with five popular contact pads and a set of abrasive belts in a sturdy box. Includes the 11213, 11216, 11218, 11219 and 11231 contact pads.
Features of the machine
1. Stripping, filleting, smoothing and polishing of metals, plastics, fibreglass, composites, rubber, glass, etc. Stripping with a contact roller or backing plate; finishing with the overhanging part of the belt.
2. The tool set includes a 40320 Dynafile II with a contact pad 11206 and additional contact pads 11203 and 11204.
3. The set also includes eight popular abrasive belts and the collet 50010 (1/4") for burrs, along with wrenches 95262 and 95281.
4. All items come in a robust carrying case.
GX PROOF 530 is a complex oil-wax composition for corrosion protection
Orbital machineGPS Orbital (GB) for rounding edges or removing burrs on flat surfaces subject to oxytresis, laser cutting, plasma cutting, stamping or shearing.
This machine allows you to process metal sheets or flat products with max . 300 mm wide. and max. 150 mm high. This device is equipped with a brush height regulator and a wear compensation system.
Deburring of workpieces can also be "dry", in this case, a dust extraction hood is available that easily connects to the machine (on request).
Orbital belt sander 144 Gecam with belt, specially designed for grinding, cleaning, polishing round or elliptical pipes with a diameter of 10 to 150 mm with a variable bend. Stepless electronic adjustment of speeds from 15 to 75 rpm of the planetary shaft with an electric system of tension and centering of the grinding belt. The machine can be equipped with a metal dust extractor and an automatic feeding system for pipes as additional options.
Planetary grinding machine LPC 135 (GB) with abrasive belts for grinding and finishing with satin. Straight or bent elements made of stainless steel, brass, iron, aluminum and other metals.
Planetary grinding machine LPC 160-WET (GB) with abrasive belts for grinding and satin finishing. Straight or bent products of stainless steel, brass, iron, aluminum or any other metal having a round, oval, elliptical or irregular cross-section. Especially suitable for processing on products made of light alloys, aluminum and titanium. The main feature compared to other machines is that our unit is equipped with 2 INDIPEN-DENT motors: 1 for rotating discs and 1 for rotating abrasive belts.
This machine also allows "dry" processing of workpieces, in this in this case, you can put an easy-to-install dust cap.
Planetary grinding machine LPC 160VS (GB) with abrasive belts for grinding and satin finishing Straight or bent products made of stainless steel, brass, iron, aluminum or any other metal with a round, oval, elliptical or irregular cross-section.
The main feature compared to other machines is that our unit is equipped with 2 independent motors: 1 for rotating the disc and 1 for rotating the abrasive belts.
Planetary grinding machine LPC 160VS-WET (GB) with abrasive belts for grinding and satin finishing. Straight or bent products of stainless steel, brass, iron, aluminum or any other metal are round, oval, elliptical or irregular in cross-section. Especially suitable for processing on products made of light alloys, aluminum and titanium.
The main feature compared to other machines is that our device is equipped with 2 individual motors: 1 for rotating the disc and 1 for rotating the abrasive belts.
This machine also allows "dry" processing of workpieces, in this case, an easy-to-install dust collection cap can be installed.
Planetary grinding machine LPC 300-WET (GB) "wet" with abrasive belts for grinding and satin finishing of straight and curved products made of stainless steel, brass, iron or any other metal having round, oval, elliptical or irregular cross-section. Especially suitable for processing on light alloy, aluminum and titanium products.
The main feature compared to similar products is that our unit is equipped with 2 independent motors: 1 for rotating the disc and 1 for rotating the sanding belts.
This the machine also allows "dry" processing of blanks.
Planetary grinding machine LPC 300/S (GB), consisting of N°2 grinding units on the same STRUCTU-RE: the first head is for grinding, and the second head is for processing straight parts with round, oval, elliptical or irregular cross-section, made of stainless steel, iron, brass and other metals.
This line is supplied ready-to-run with automatic feeding systems suitable for straight tubes.
The main feature compared to other machines is that our unit is equipped with 2 independent motors: 1 for rotating the disc and 1 for rotating the abrasive belts.
Planetary grinding machine LPC 300VS-WET (GB) "wet" with abrasive belts for grinding and satin finishing straight and curved products made of stainless steel, brass, iron or any other metal having a round , oval, elliptical or irregular cross-section. Especially suitable for processing on light alloy, aluminum and titanium products.
The main feature compared to similar products is that our unit is equipped with 2 independent motors: 1 for rotating the disc and 1 for rotating the sanding belts.
This the machine also allows "dry" processing of blanks.
Planetary grinding machine LPC 500 (GB) with abrasive belts for grinding and satin finishing. Straight or bent products of stainless steel, brass, iron, aluminum or any other metal having a round, oval, elliptical or irregular cross-section. The main feature compared to other machines is that our unit is equipped with 2 independent motors: 1 for rotating the disc and 1 for rotating the abrasive belts.
Planetary grinding machine LPC 500 TE (GB) with abrasive belts, special version with narrow pulleys, suitable for grinding shaped parts, with a bending radius of more than 90 °.
The main feature compared to other machines is that our unit is equipped with 2 independent motors: 1 for rotating the disc and 1 for rotating the abrasive belts.
Planetary grinding machine LPC 500-WET (GB) "wet" with abrasive belts for grinding and satin finishing straight and curved products made of stainless steel, brass, iron or any other metal that has a round, oval, elliptical or irregular cross-section. Especially suitable for processing on products made of light alloys, aluminum and titanium.
The main feature compared to similar ones is that our unit is equipped with 2 independent motors: 1 for rotating the disc and 1 for rotating the grinding belts.
This machine also allows "dry" processing of workpieces, in which case an easy-to-install dust collection cap can be provided.
