All goods

Planetary grinding machine LPC 90 (GB) with abrasive belts for grinding and satin finishing. Straight or bent products made of stainless steel, brass, iron, aluminum and other metals.

Planetary grinding machine LPC LPC 300 (GB) with abrasive belts for grinding and satin finishing. Straight or bent stainless steel, brass, iron, aluminum or any other metal with round, oval, elliptical or irregular cross-section.
The main feature compared to other machines is that our unit is equipped with 2 independent motors: 1 for rotating the disc and 1 for rotating the abrasive tapes.

Planetary grinding machine LPS 160 (GB) with abrasive belts for grinding and satin finishing. Straight or bent products made of stainless steel, brass, iron, aluminum or any other metal with a round, oval, elliptical or irregular cross-section.
The main feature compared to other machines is that our unit is equipped with 2&nbsp by independent motors: 1 for rotation of discs and 1 for rotation of abrasive belts.

Planetary grinding machine LT 130/S (GB) consisting of N°2 grinding blocks on the same STRUCTU-RE: the first head is intended for grinding, and the second head is for processing straight parts with round, oval , elliptical or irregular cross-section, made of stainless steel, iron, brass and other metals.
This line is supplied ready to work with front and rear SELFCENTERING feed system, also suitable for taper and shaped parts.

Planetary grinding machine LT 130-WET (GB) "wet" for high-volume grinding and finishing requirements of straight tubes made of stainless steel, brass, iron, aluminum or any other metal, having a round, oval, elliptical or irregular cross-section. Especially suitable for processing light alloy, aluminum and titanium products.
This machine is supplied ready to use with a SELFCENTERING feed system, also suitable for conical and shaped parts. This machine also allows for "dry" processing of workpieces, in which case you can install an easy-to-install dust collection cap.

Planetary grinding machine LT 200/S (GB), consisting of two processing units on the same structure: the first head is intended for grinding, and the second head is for processing straight parts with round, oval, elliptical or irregular cross-section, made of stainless steel, iron, aluminum, brass and other metals. This line comes ready-to-run with front and rear SELFCENTERING feed systems, also suitable for tapered and shaped parts.

Planetary polishing machine LPC 160VS-Mirror (GB) in a special narrow version that works with a liquid paste dispenser only for processing mirrors and polishing straight and bent stainless steel, brass tubes , iron or any other metal having a round, oval or irregular cross-section, from 5 to 50 mm. For some color applications through abrasive belts also suitable for grinding and preparing surfaces for mirror polishing. The machine is supplied complete with an inverter unit to ensure proper "mirror polishing".

Planetary polishing machine LPC 300VS-Mirror (GB) in a special narrow version, working with a liquid paste dispenser, only for processing mirror surfaces and polishing on straight and bent pipes made of stainless steel, brass, iron or any other metal , having a round, oval or irregular cross-section, from 5 to 100 mm. Also suitable for sanding and preparing surfaces for mirror polishing for some colored applications using abrasive belts.
The machine comes complete with an inverter unit to ensure proper "mirror polishing".

Absolutely new technology: planetary polishing machine LPC 500-Mirror (GB) with the possibility of connecting to a dispenser for liquid paste, for finishing mirrors and grinding on straight and bent tubes made of stainless steel, brass, iron or any of other metal, having a round, oval or irregular cross-section, from 5 to 200 mm. For other applications, thanks to the abrasive belts, it is also suitable for grinding and preparing surfaces for mirror polishing.
The machine is supplied complete with an inverter device for adjusting the speed of the abrasive belts to ensure a proper "mirror polishing".

Absolutely new technology: planetary polishing machine LPS 160-Mirror (GB)  with dispenser for hard paste (optional for liquid paste), for mirror processing and grinding on straight and bent pipes made of stainless steel, brass, iron or any other metal with a round, oval or irregular cross-section, from 5 to 50 mm . For some color applications through abrasive belts also suitable for grinding and preparing surfaces for mirror polishing. The machine is supplied complete with an inverter unit to ensure proper "mirror polishing".

Scotch-Brite radial brushes™ BB-ZB are usually used on stationary equipment, for example, on grinding and grinding machines with manual feed of the part to the machine or on pass-through machines with automatic feed of the part.

To remove paint, stains , adhesives, weld burns, rust, heavy oxides and surface contamination from various metals, use Scotch Brite™ Radial Bristle Brush. Brushes use our proprietary 3M™ Ceramic Abrasive Grain, including aluminum oxide, with molded, flexible yet firm bristles that provide more surface contact than brushes. We have increased the life compared to wire and other abrasive discs. Abrasives wear down gradually over the life of the product, and they work well on a variety of metals, including aluminum, brass, bronze, carbon steel, cast iron, stainless steel, and more. Ceramic abrasive grain is a ceramic mineral manufactured using the 3M process to increase grain strength and hardness. Discs Scotch Brite™ uses aluminum oxide mixed with a ceramic abrasive grain, and the result is one of the hardest, longest-lasting minerals. Ceramic abrasives are designed to cut and machine quickly under intense heat and stress. Ceramic abrasive grain is superior to aluminum oxide abrasives in terms of speed and durability. It can be used for industrial grinding and finishing. Scotch Brite Industrial Abrasives are unique surface preparation products with abrasives embedded in non-woven nylon or synthetic fibers. Combining abrasives with fibers creates an abrasive system that provides consistent results throughout the life of the product.

Scotch-Brite radial brushes™ BB-ZB are usually used on stationary equipment, for example, on grinding and grinding machines with manual feed of the part to the machine or on pass-through machines with automatic feed of the part.

To remove paint, stains , adhesives, weld burns, rust, heavy oxides and surface contamination from various metals, use Scotch Brite™ Radial Bristle Brush. Brushes use our proprietary 3M™ Ceramic Abrasive Grain, including aluminum oxide, with molded, flexible yet firm bristles that provide more surface contact than brushes. We have increased the life compared to wire and other abrasive discs. Abrasives wear down gradually over the life of the product, and they work well on a variety of metals, including aluminum, brass, bronze, carbon steel, cast iron, stainless steel, and more. Ceramic abrasive grain is a ceramic mineral manufactured using the 3M process to increase grain strength and hardness. Discs Scotch Brite™ uses aluminum oxide mixed with a ceramic abrasive grain, and the result is one of the hardest, longest-lasting minerals. Ceramic abrasives are designed to cut and machine quickly under intense heat and stress. Ceramic abrasive grain is superior to aluminum oxide abrasives in terms of speed and durability. It can be used for industrial grinding and finishing. Scotch Brite Industrial Abrasives are unique surface preparation products with abrasives embedded in non-woven nylon or synthetic fibers. Combining abrasives with fibers creates an abrasive system that provides consistent results throughout the life of the product.

Scotch-Brite radial brushes™ BB-ZB are usually used on stationary equipment, for example, on grinding and grinding machines with manual feed of the part to the machine or on pass-through machines with automatic feed of the part.

To remove paint, stains , adhesives, weld burns, rust, heavy oxides and surface contamination from various metals, use Scotch Brite™ Radial Bristle Brush. Brushes use our proprietary 3M™ Ceramic Abrasive Grain, including aluminum oxide, with molded, flexible yet firm bristles that provide more surface contact than brushes. We have increased the life compared to wire and other abrasive discs. Abrasives wear down gradually over the life of the product, and they work well on a variety of metals, including aluminum, brass, bronze, carbon steel, cast iron, stainless steel, and more. Ceramic abrasive grain is a ceramic mineral manufactured using the 3M process to increase grain strength and hardness. Discs Scotch Brite™ uses aluminum oxide mixed with a ceramic abrasive grain, and the result is one of the hardest, longest-lasting minerals. Ceramic abrasives are designed to cut and machine quickly under intense heat and stress. Ceramic abrasive grain is superior to aluminum oxide abrasives in terms of speed and durability. It can be used for industrial grinding and finishing. Scotch Brite Industrial Abrasives are unique surface preparation products with abrasives embedded in non-woven nylon or synthetic fibers. Combining abrasives with fibers creates an abrasive system that provides consistent results throughout the life of the product.

Scotch-Brite radial brushes™ BB-ZB are usually used on stationary equipment, for example, on grinding and grinding machines with manual feed of the part to the machine or on pass-through machines with automatic feed of the part.

To remove paint, stains , adhesives, weld burns, rust, heavy oxides and surface contamination from various metals, use Scotch Brite™ Radial Bristle Brush. Brushes use our proprietary 3M™ Ceramic Abrasive Grain, including aluminum oxide, with molded, flexible yet firm bristles that provide more surface contact than brushes. We have increased the life compared to wire and other abrasive discs. Abrasives wear down gradually over the life of the product, and they work well on a variety of metals, including aluminum, brass, bronze, carbon steel, cast iron, stainless steel, and more. Ceramic abrasive grain is a ceramic mineral manufactured using the 3M process to increase grain strength and hardness. Discs Scotch Brite™ uses aluminum oxide mixed with a ceramic abrasive grain, and the result is one of the hardest, longest-lasting minerals. Ceramic abrasives are designed to cut and machine quickly under intense heat and stress. Ceramic abrasive grain is superior to aluminum oxide abrasives in terms of speed and durability. It can be used for industrial grinding and finishing. Scotch Brite Industrial Abrasives are unique surface preparation products with abrasives embedded in non-woven nylon or synthetic fibers. Combining abrasives with fibers creates an abrasive system that provides consistent results throughout the life of the product.

Scotch-Brite radial brushes™ BB-ZB are usually used on stationary equipment, for example, on grinding and grinding machines with manual feed of the part to the machine or on pass-through machines with automatic feed of the part.

To remove paint, stains , adhesives, weld burns, rust, heavy oxides and surface contamination from various metals, use Scotch Brite™ Radial Bristle Brush. Brushes use our proprietary 3M™ Ceramic Abrasive Grain, including aluminum oxide, with molded, flexible yet firm bristles that provide more surface contact than brushes. We have increased the life compared to wire and other abrasive discs. Abrasives wear down gradually over the life of the product, and they work well on a variety of metals, including aluminum, brass, bronze, carbon steel, cast iron, stainless steel, and more. Ceramic abrasive grain is a ceramic mineral manufactured using the 3M process to increase grain strength and hardness. Discs Scotch Brite™ uses aluminum oxide mixed with a ceramic abrasive grain, and the result is one of the hardest, longest-lasting minerals. Ceramic abrasives are designed to cut and machine quickly under intense heat and stress. Ceramic abrasive grain is superior to aluminum oxide abrasives in terms of speed and durability. It can be used for industrial grinding and finishing. Scotch Brite Industrial Abrasives are unique surface preparation products with abrasives embedded in non-woven nylon or synthetic fibers. Combining abrasives with fibers creates an abrasive system that provides consistent results throughout the life of the product.

Sander GO (GB) allows you to sand, satin and process square, rectangular and profiled metal objects of various shapes.
Our device has an abrasive belt system powered by an independent motor-reducer, which allows you to get a better finish surfaces and higher performance of the abrasive belt; this movement is mechanically conceived as a complete rocking head that swings up and down.
The main holding table can be tilted up to 45 ° for further processing on special shaped parts.
The grinding machine can be equipped with a rubber roller and an additional special work table for finishing work on CONCAVE or CONVEX surfaces.
Dust collection is achieved by holes made in the work table.

Everyone should have KK114F sanding paper rolls at their workplace: it is a universal tool for manual sanding. Thanks to its highly flexible backing, it conforms to the finest contours and can be easily torn to the required length.