Hand tools Dynabrade

Dynabag II Orbital Sander, 3-7/8'' Width x 5-5/8" Length (99mm x 143mm) for use with centralized dust extraction system 58506

Article: 58506

0.00 грн

Fast Order

Features of the machine
1. Powerful 0.15 hp air motor. (112 W), 10,000 rpm allows for a variety of jobs using only 13 standard cubic pounds (368 liters) per minute at 90 psig (6.2 bar).
2. The precise 3/32" orbit movement is ideal for controlled and ultra-fine machining of various surfaces. Compact and ideal for all operators, including those with small palm sizes.
3. Due to the special design and according to the test results, the tool produces less vibration than any competing model! Thanks to the light weight, the fatigue of the hands and forearms is reduced. The tool is perfect for processing vertical surfaces. The rectangular shape allows you to grind corners inaccessible to round soles.
4. The Dynabag II central vacuum system has a 1" OD vacuum port ready for connection to an external vacuum source.
5. Includes 56323 Delta Vacuum Sanding Pad 99mm wide (at wide end) and 143mm long (approx 4"x 5-3/4") which has seven vacuum holes. The unique platform has curved edges for sanding round areas and a pointed end for finishing tight corners. The convenient platform offers an additional support for the hand and wrist, increasing comfort for the operator. It also offers increased protection against the release of cold air (the platform is removable). Order platform 59330 separately to install on existing tools!

Dynabag II Orbital Sander 3-3/”4 (82mm) Width x 5” (127mm) Length For Use With Central Dust Extraction System 58505

Article: 58505

0.00 грн

Fast Order

Features of the machine
1. A powerful 0.15 hp air motor. (112 W), 10,000 rpm allows for a variety of jobs using only 13 standard cubic pounds (368 liters) per minute at 90 psig (6.2 bar).
2. The precise 3/3" orbit movement is ideal for controlled and ultra-fine machining of various surfaces. Compact and ideal for all operators, including those with small palm sizes.
3. Due to the special design and according to the test results, the tool produces less vibration than any competing model! Thanks to the light weight, the fatigue of the hands and forearms is reduced. The tool is perfect for processing vertical surfaces. The rectangular shape allows you to grind corners inaccessible to round soles.
4. The Dynabag II central vacuum system has a 1" OD vacuum port ready for connection to an external vacuum source.
5. Includes a 56319 vacuum sanding pad 80mm wide by 130mm long (approx. 3-1/4"x 5"), with eight vacuum holes. The convenient platform offers an additional support for the hand and wrist, increasing comfort for the operator. It also offers increased protection against the release of cold air (the platform is removable). Order platform 59330 separately for installation on existing tools!

Dynabag II Orbital Sander, 3-1/4” (82mm) Width x 5” (127mm) Length, with Automatic Dust Extraction 58504

Article: 58504

0.00 грн

Fast Order

Features of the machine
1. A powerful 0.15 hp air motor. (112 W), 10,000 rpm allows for a variety of jobs using only 13 standard cubic pounds (368 liters) per minute at 90 psig (6.2 bar).
2. The precise 3/32" orbit movement is ideal for controlled and ultra-fine machining of various surfaces. Compact and ideal for all operators, including those with small palm sizes.
3. Due to the special design and according to the test results, the tool produces less vibration than any competing model! Thanks to the light weight, the fatigue of the hands and forearms is reduced. The tool is perfect for processing vertical surfaces. The rectangular shape allows you to grind corners inaccessible to round soles.
4. Dust collection in Dynabag II occurs automatically through the exhaust system. The tool has a vacuum nozzle with an external ø 1" with the possibility of connecting to additional dust removal systems.
5. Includes a 56319 vacuum sanding pad 80mm wide by 130mm long (approx. 3-1/4"x 5"), with eight vacuum holes. The convenient platform offers an additional support for the hand and wrist, increasing comfort for the operator. It also offers increased protection against the release of cold air (the platform is removable). Order platform 59330 separately for installation on existing tools!

Straight burr, 0.4 hp 43515

Article: 43515

0.00 грн

Features of the machine

1. Dynabrade Die Grinder Series - 4 hp (298 W) with extended models for reaching previously inaccessible areas. Offering 3‘ (76 mm) or 6’ (152 mm) extended shafts, these tools allow you to efficiently machine in deep part channels and difficult passages!

2. Ideal for deburring, fast surface cleaning, surface preparation, finishing and polishing. Carbide burrs, abrasive stones, grit and moulded abrasives can be mounted on the tool.

3. The shaft diameter of only (3/4") 19 mm fits into the tightest of spaces! The throttle-controlled motor maintains speed under load.

4. Ergonomic tool body with comfortable soft-touch handle. The safety throttle lever prevents accidental start-up.

Multifunctional set with abrasive belt tool DynaFile II 40321

Article: 40321

0.00 грн

Features of the machine

1. Stripping, filleting, smoothing and polishing of metals, plastics, fibreglass, composites, rubber, glass, etc. Stripping with a contact roller or backing plate; finishing with the overhanging part of the belt.

2. The tool set includes a 40320 Dynafile II with a contact pad 11206 and additional contact pads 11203 and 11204.

3. The set also includes eight popular abrasive belts and the collet 50010 (1/4") for burrs, along with wrenches 95262 and 95281.

4. All items come in a robust carrying case.

Multifunctional set with abrasive belt tool DynaFile 14010

Article: 14010

0.00 грн

Features of the machine

1. The world-famous Dynafile tool for stripping, filing, smoothing, polishing, finishing - and more! Sanding with the contact roller or backing pad. Finishing with the overhanging part of the belt. For use on metals, plastics, fibreglass, composites, rubber, glass and stone.

2. The tool is supplied with a contact console 11218 for standard load. It also allows for the use of various additional contact arms. Work areas as small as 3/8’ in diameter. Excellent control allows for the use of 1/8‘, 1/4’ or 1/2‘ wide abrasive belts with a length of 24’.

3. The motor can be easily adjusted to the most convenient position of the hand lever. Quick and easy belt change. Hard and soft backing pads can be mounted on the contact arms for aggressive deburring or for polishing contoured surfaces.

4. Includes the DynaFile 14000 with five popular contact pads and a set of abrasive belts in a sturdy box. Includes the 11213, 11216, 11218, 11219 and 11231 contact pads.

Dynastrate Finishing Machine with 6’ (152 mm) extension 13511

Article: 13511

0.00 грн

Features of the machine:

1. Pneumatic finishing machine Dynamite for matting, deburring and polishing stainless steel, aluminium, carbon steel and composites.

2. 1800 rpm, 6’ extension, 1 hp. The tool comes with a combination clamping mandrel

ø 5/8‘ or 1’ for discs up to 3‘ wide with a ø 5/8’ or 1’ centre hole.

3. Any Dynacushen pneumatic drum with a 5/8’ bore (e.g. 92938) can be fitted.

4. Soft grip handle provides comfort for the operator.

Finishing machine Dainisher 13400

Article: 13400

0.00 грн

Features of the machine:

1. The Dainisher Pneumatic Finishing Machine delivers an excellent finish on metal.

2. 3400 rpm, 0.7 hp Great for lapping and finishing stainless steel and other metals, leaves a longitudinal scratch pattern (‘satin’ effect).

3. The clamping mandrel (ø3/4") allows for the installation of various abrasives and accessories.

4. Variable speed control and throttle lever with safety catch.

5. Ideal for use with the optional Dynacushen air drum (ø5‘, width 3-1/2’)